The way to Put in a Diy Bedliner inside 5 Methods

My sons and I recently installed a do-it-yourself bedliner on our 1980 pickup. It’s hard to believe just how much better it looks. We found several tricks even as we completed the project. Listed here are 5 steps to the project and suggestions to accomplish it right.

Step 1 – Pick the proper truck bed paint…

Truck bed paint is special. It’s a polyurethane paint , but it contains rubber pieces to offer it texture. The utmost effective brands are Herculiner, Plasti-Kote and Duplicolor. You’ll need about 5 quarts for the full size truck. Get plenty of paint, since a great thick coat is what you want.

Step 2 – Clean first…

An excellent clean surface could be the first step to success. Washing the bed is very important, but it’s not enough. That’s because you need to remove any old wax or grease. That’s easy. Just obtain a regularly automotive grease and wax remover from your auto parts store.

Step 3 – Rough is good…

Paint sticks best to an area that’s been roughed up or sanded. Don’t spare the abrasives. Use rough sandpaper and other abrasives to essentially scratch up the outer lining to be coated. bedliner That is a trick to a paint coat that basically sticks and lasts.

Step 4 – Mask or else…

Truck bed paint is truly sticky. Get it where that you don’t want it and you’ve got trouble. So mask carefully for a nice job.

Step 5 – Rolling is easy…

Bed liner paint can be brushed, rolled or sprayed on. This paint is so heavy and thick, you can’t tell a rolled on coating wasn’t sprayed on. A roller puts on an attractive coating. Here’s the thing. Do the preparation properly. Get the outer lining cleaned and sanded right. Then applying the finish couldn’t be easier. There’s nothing to applying the coating.

Save a pile of money and make your truck look much better with a do-it-yourself bedliner. It’s easy to do. Just make certain and don’t skip the cleaning and sanding. This is a great way to enhance the looks of an older truck.

Leave a reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>